A look at some of the various welding machines and supplies will give you a clear glimpse into their quality and versatility.

 
The Inverter DC ARC Welding Machine (EWDA Series): There are four different machines in this series. Torch cable and earth cable accessories are available for the entire series.
 
Features include: 
• IGBT module-type control 
• Electric shock protection built in 
• Electric power conversion efficiency greater than 85% 
• High duty cycle 
• Automatic output cutoff at high interior temperature
 
The Inverter AC/DC Tig Welding Machine: There are two different machines in this series. Accessories available for both include torch and earth cables, as well as a regulator.
 
Features include:
 
• DC TIG, DC Pulse TIG, DC MMA 
• AC TIG, AC MMA 
• Arc spot welding 
• Crater off/single, repeat selection 
• High frequency start 
• Pulse width/frequency, after-flow time control 
• Up/down slope time control is possible 
• Start/crater/pulse current control 
• Mild Steel, nickel alloy, copper alloy, stainless, aluminum alloy, titanium alloy
 
The Inverter Mig/Mag C02 Welding Machine: There are three different machines in this series, both including torch and earth cable accessories.
 
Features include: 
• DC TIG, DC Pulse TIG, DC MMA 
• AC TIG, AC MMA 
• Arc spot welding 
• Crater off/single, repeat selection 
• High frequency start 
• Pulse width/frequency, after-flow time control 
• Up/down slope time control is possible 
• Start/crater/pulse current control 
• Mild Steel, nickel alloy, copper alloy, stainless, aluminum alloy, titanium alloy
 
Submerged Arc Welding Machine (Saw and Gouging): There are two machines in this series with available accessories of a welding cable, a carriage rail, and flux recovery.
 
Features include:
 
• Application: 1) Carbon arc air gouging 2) Submerged arc welding for various steel products 
• Electric circuit automatically operated by the gouging switch and can decrease unnecessary non-load electric power when arc is off 
• Feedback of constant current 
• Unified PCB, which allows for easy replacement and maintenance 
• High efficient Thyristor control 
• Main transformer, reactor, and radiator designed to consider temperature characteristics, insulation, and safety factors.
 
Inverter Plasma Cutter:
 
Features include:
 
The beginner can available for easy operation 
Cutting is available by contact or non-contact of no-nozzle 
High speed cutter is available without thermal distortion 
Auto-stop at low voltage, over-current, overheat, air pressure error strong power

Various Types of Arc Welding Machines
Time: 2019-08-12
LOCATION:HOME - NEWS

NEWS